Kaiheng New Material Technology Nantong Co., Ltd. is specialized in the production of Teflon mesh conveyor belt, Teflon high temperature resistant cloth, Teflon high temperature tape, seamless bonding machine conveyor belt source manufacturers.

Kaiheng

简体中文
新闻资讯

Why does double-sided tape fail?

2022-04-28

When there are many impurities or particles on the surface of the adherend of the double-sided tape, the adhesion of the double-sided tape will also be reduced.

PE hook foam double-sided adhesive

2022-04-28

PE foam double-sided tape refers to a double-sided tape made of acrylic glue on both sides of the PE foamed substrate. The colors are mainly white, black and gray, the common thicknesses are 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm and 3.0mm, and the foaming multiples are 5 times, 8 times, 10 times, 15 times , 20 times and 30 times, the release type is mainly release paper (white,) and release film (red, green, blue, orange)

Die-cutting operation process

2022-04-28

The main process of die-cutting and molding is: upper die→put the bottom plate→adjust the pressure→test pressure die-cutting→positioning→formal die-cutting molding→remove waste→finished product inspection→point packing

Teflon high temperature tape storage method

2022-04-28

The tape should be stored in the warehouse to avoid sunlight and rain; it is forbidden to contact with acid-base oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature is between -15 ℃ ~ 40 ℃.

The problem of load-bearing performance of Teflon mesh belt

2022-04-28

The load-bearing performance of Teflon mesh belt is not only related to its own strength, but also to its weaving method and the weight of the items transported in the square area. If you have to give an answer, this answer is still difficult to answer, because Teflon mesh belts are used in a variety of environments, not a unified standardized production line. Many customers customize production lines according to their own requirements. The same, the answer will be different.

What are the main performance characteristics of Teflon cloth?

2022-04-28

1. It is used for low temperature -196 ℃ and high temperature between 350 ℃, with weather resistance, http://www.txtefulong.com anti-aging. After practical application, if placed at a high temperature of 250 °C for 200 days, not only the strength will not decrease, but also the weight will not decrease; if placed at a high temperature of 350 °C for 120 hours, the weight will only decrease by about 0.6%; at -180 °C No cracking occurs under ultra-low temperature, and the original softness is maintained.

What are the applications of polypropylene film for spunbond polyethylene and polypropylene film?

2022-04-28

Polypropylene films of spunbond polyethylene and polypropylene films generally refer to biaxially oriented polypropylene films. Biaxially oriented polypropylene film (BOPP) is usually a multi-layer pneumatic film. After polypropylene particles are formed into sheets by pneumatics, they are made by stretching in two directions. Due to the stretched molecular direction, the film has good physical stability, mechanical strength, air tightness, high transparency and gloss, tough, wear-resistant, widely used printing film, the thickness is generally 20 ~ 40 m, the most widely used is 20 m.

Which industries are breathing paper used for?

2022-04-28

The polypropylene film of breathing paper spunbond polyethylene and polypropylene film generally refers to biaxially oriented polypropylene film. Biaxially oriented polypropylene film (BOPP) is usually a multi-layer pneumatic film. Made by stretching in one direction, the film has excellent physical stability and mechanical strength due to the stretched molecular direction.

How is the barrier film handled?

2022-04-28

The polypropylene film of the barrier film spunbond polyethylene and polypropylene film generally refers to the biaxially oriented polypropylene film, and the biaxially oriented polypropylene film (BOPP) is usually a multilayer pneumatic film. Made by stretching in one direction, the film has excellent physical stability and mechanical strength due to the stretched molecular direction.

< 1 >

Related News

Congratulations on the launch of the website of Kaiheng New Material Technology Nantong Co., Ltd.

2022-04-28

The company has been focusing on the research and development, production, sales and service of fluorine and silicon series coating products. The products cover PTFE architectural membrane, Teflon high temperature resistant varnished cloth, Teflon mesh conveyor belt, Teflon adhesive tape, seamless belt, etc.

Why does double-sided tape fail?

2022-04-28

When there are many impurities or particles on the surface of the adherend of the double-sided tape, the adhesion of the double-sided tape will also be reduced.

PE hook foam double-sided adhesive

2022-04-28

PE foam double-sided tape refers to a double-sided tape made of acrylic glue on both sides of the PE foamed substrate. The colors are mainly white, black and gray, the common thicknesses are 0.3mm, 0.5mm, 0.8mm, 1.0mm, 1.5mm, 2.0mm and 3.0mm, and the foaming multiples are 5 times, 8 times, 10 times, 15 times , 20 times and 30 times, the release type is mainly release paper (white,) and release film (red, green, blue, orange)

Die-cutting operation process

2022-04-28

The main process of die-cutting and molding is: upper die→put the bottom plate→adjust the pressure→test pressure die-cutting→positioning→formal die-cutting molding→remove waste→finished product inspection→point packing

Teflon high temperature tape storage method

2022-04-28

The tape should be stored in the warehouse to avoid sunlight and rain; it is forbidden to contact with acid-base oil and organic solvents, keep it clean and dry, 1m away from the discovery device, and the room temperature is between -15 ℃ ~ 40 ℃.

The problem of load-bearing performance of Teflon mesh belt

2022-04-28

The load-bearing performance of Teflon mesh belt is not only related to its own strength, but also to its weaving method and the weight of the items transported in the square area. If you have to give an answer, this answer is still difficult to answer, because Teflon mesh belts are used in a variety of environments, not a unified standardized production line. Many customers customize production lines according to their own requirements. The same, the answer will be different.

What are the main performance characteristics of Teflon cloth?

2022-04-28

1. It is used for low temperature -196 ℃ and high temperature between 350 ℃, with weather resistance, http://www.txtefulong.com anti-aging. After practical application, if placed at a high temperature of 250 °C for 200 days, not only the strength will not decrease, but also the weight will not decrease; if placed at a high temperature of 350 °C for 120 hours, the weight will only decrease by about 0.6%; at -180 °C No cracking occurs under ultra-low temperature, and the original softness is maintained.

What are the applications of polypropylene film for spunbond polyethylene and polypropylene film?

2022-04-28

Polypropylene films of spunbond polyethylene and polypropylene films generally refer to biaxially oriented polypropylene films. Biaxially oriented polypropylene film (BOPP) is usually a multi-layer pneumatic film. After polypropylene particles are formed into sheets by pneumatics, they are made by stretching in two directions. Due to the stretched molecular direction, the film has good physical stability, mechanical strength, air tightness, high transparency and gloss, tough, wear-resistant, widely used printing film, the thickness is generally 20 ~ 40 m, the most widely used is 20 m.

Which industries are breathing paper used for?

2022-04-28

The polypropylene film of breathing paper spunbond polyethylene and polypropylene film generally refers to biaxially oriented polypropylene film. Biaxially oriented polypropylene film (BOPP) is usually a multi-layer pneumatic film. Made by stretching in one direction, the film has excellent physical stability and mechanical strength due to the stretched molecular direction.

How is the barrier film handled?

2022-04-28

The polypropylene film of the barrier film spunbond polyethylene and polypropylene film generally refers to the biaxially oriented polypropylene film, and the biaxially oriented polypropylene film (BOPP) is usually a multilayer pneumatic film. Made by stretching in one direction, the film has excellent physical stability and mechanical strength due to the stretched molecular direction.

Kaiheng

Copyright © Kaiheng New Material Technology Nantong Co., LTD

Powered by www.300.cn

SEO

sitemap

Contact us

Tel：+86-13915551565

E-mail：sales@ntkaiheng.com

Address: No. 333 Xisu Road, High-tech Zone, Haian City, Nantong, Jiangsu Province

What can we offer?

Teflon grid conveyor belt

Teflon high temperature cloth

Teflon high temperature tape

Seamless bonding machine conveyor belt