The load-bearing performance of the Teflon mesh belt is not only related to its own strength, but also to its weaving method and the weight of the items transported in the square area. If you have to give an answer, this answer is still difficult to answer, because Teflon mesh belts are used in a variety of environments, not a unified standardized production line. Many customers customize production lines according to their own requirements. The same, the answer will be different.

Teflon mesh belt is a light-duty conveyor belt, and its light weight also determines that its load-bearing performance is not very good, and it cannot withstand excessive pulling force, and the load-bearing capacity also needs external assistance, such as using idlers on the production line and not using it. Idler, its load-bearing capacity is not the same. Generally speaking, if the Teflon mesh belt is a 4*4 double-weft mesh belt with a large bearing capacity per unit area, it is no problem to withstand 20 kg, but if it is some special small mesh, if the weaving method is different, the strength will be reduced. There will be a decline. If there is no external assistance, there will definitely be problems under heavy tension for a long time. In time, external assistance was used to bear the load, and it could not bear the heavy load. Therefore, when choosing a Teflon mesh belt, you should choose a Teflon mesh belt with appropriate mesh and tensile strength according to your own requirements.